CAN Interrupt Definition

group CAN_Interrupt_Definition

Defines

CAN_RAM_MOVE_DONE_INT BIT5

Triggered when data move from register to CAN IP internal RAM finished.

CAN_BUS_OFF_INT BIT4

Triggered when the bus is off.

CAN_WAKE_UP_INT BIT3

Triggered by wake-up interrupt.

CAN_ERROR_INT BIT2

Triggered by an error during transmission.

CAN_RX_INT BIT1

Triggered when data is received.

CAN_TX_INT BIT0

Triggered when sending is completed.

IS_CAN_INT_CONFIG(CONFIG)                                        (((CONFIG) == CAN_RAM_MOVE_DONE_INT

)  || \

((CONFIG) ==

CAN_BUS_OFF_INT

)        || \

((CONFIG) ==

CAN_WAKE_UP_INT

)        || \

((CONFIG) ==

CAN_ERROR_INT

)          || \

((CONFIG) ==

CAN_RX_INT

)             || \

((CONFIG) ==

CAN_TX_INT))

Check if the input parameter is valid.