CAN Interrupt Flag

group CAN_Interrupt_Flag

Defines

CAN_RAM_MOVE_DONE_INT_FLAG BIT5

Triggered when data move from register to CAN IP internal RAM finished.

CAN_BUS_OFF_INT_FLAG BIT4

Triggered when the bus is off.

CAN_WAKE_UP_INT_FLAG BIT3

Triggered by wake-up interrupt.

CAN_ERROR_INT_FLAG BIT2

Triggered by an error during transmission.

CAN_RX_INT_FLAG BIT1

Triggered when data is received.

CAN_TX_INT_FLAG BIT0

Triggered when sending is completed.

IS_CAN_INT_FLAG(FLAG)                                        (((CONFIG) == CAN_RAM_MOVE_DONE_INT_FLAG

) || \

((CONFIG) ==

CAN_BUS_OFF_INT_FLAG

)       || \

((CONFIG) ==

CAN_WAKE_UP_INT_FLAG

)       || \

((CONFIG) ==

CAN_ERROR_INT_FLAG

)         || \

((CONFIG) ==

CAN_RX_INT_FLAG

)            || \

((CONFIG) ==

CAN_TX_INT_FLAG))

Check if the input parameter is valid.