Memory to Memory-Multi Block

This sample uses the multi block feature of GDMA to achieve data transfer from memory to memory.

When the total size of the data to be transferred exceeds 65535, the multi block feature needs to be used.

In this sample, the multi block feature uses a block link list for transmission, which can divide larger data into several link list items for transfer, ensuring that the data amount of each link list item does not exceed 65535.

Users can modify some GDMA settings through relevant macro configurations, including the types of interrupts enabled, channel configuration, and data transfer length. For detailed explanations of specific macro configuration items, please refer to Configurations.

Requirements

For hardware requirements, please refer to the Requirements.

Configurations

The following macros can be configured to modify the GDMA data transfer length.

#define GDMA_TRANSFER_SIZE              200                 /*< Set this macro to modify the transfer size. */
#define GDMA_MULTIBLOCK_SIZE            12                  /*< Set this macro to modify the block size. */

The following macros represent the parameter configurations of the allocated GDMA channel.

#define MULTI_BLOCK_DMA_CHANNEL_NUM     multi_block_dma_ch_num
#define MULTI_BLOCK_DMA_CHANNEL         DMA_CH_BASE(multi_block_dma_ch_num)
#define MULTI_BLOCK_DMA_IRQ             DMA_CH_IRQ(multi_block_dma_ch_num)

The entry function is as follows, call this function in main() to run this sample code. For more details, please refer to the Initialization.
```
dma_multiblock_demo();
```

Building and Downloading

For building and downloading, please refer to the Building and Downloading.

Experimental Verification

Press the Reset button on the EVB.
After initialization is complete, the GDMA begins transferring data. Once the GDMA completes the data transfer, it will trigger an interrupt. Observe the data transfer completion message displayed in the Debug Analyzer.
```
multi_block_dma_handler: Data transmission completion!
```

Note

If an error is detected in the transferred data, observe the error information in the Debug Analyzer.

Code Overview

This section introduces the code and process description for initialization and corresponding function implementation in the sample.

Source Code Directory

The directory for project file and source code are as follows:

For project directory, please refer to Source Code Directory.
Source code directory: sdk\src\sample\io_demo\gdma\multiblock\dma_multiblock_demo.c.

Initialization

The initialization flow for peripherals can refer to Initialization Flow.

In this sample, data is transferred from memory to memory, so there is no need to set PAD and PINMUX.
Call RCC_PeriphClockCmd() to enable the GDMA clock.
Call GDMA_channel_request to request a free GDMA channel and register the GDMA interrupt handler.

Initialize the GDMA peripheral:

Define a GDMA_InitTypeDef type GDMA_InitStruct, and call GDMA_StructInit() to pre-fill GDMA_InitStruct with default values.
Modify the GDMA_InitStruct parameters as needed. The initialization parameters for the GDMA channel are configured as shown in the table below.

GDMA Initialization Parameters
GDMA Hardware Parameters	Setting in the `GDMA_InitStruct`	GDMA
Channel Num	`GDMA_InitTypeDef::GDMA_ChannelNum`	`MULTI_BLOCK_DMA_CHANNEL_NUM`
Transfer Direction	`GDMA_InitTypeDef::GDMA_DIR`	`GDMA_DIR_MemoryToMemory`
Buffer Size	`GDMA_InitTypeDef::GDMA_BufferSize`	`GDMA_TRANSFER_SIZE`
Source Address Increment or Decrement	`GDMA_InitTypeDef::GDMA_SourceInc`	`DMA_SourceInc_Inc`
Destination Address Increment or Decrement	`GDMA_InitTypeDef::GDMA_DestinationInc`	`DMA_DestinationInc_Inc`
Source Data Size	`GDMA_InitTypeDef::GDMA_SourceDataSize`	`GDMA_DataSize_Byte`
Destination Data Size	`GDMA_InitTypeDef::GDMA_DestinationDataSize`	`GDMA_DataSize_Byte`
Source Burst Transaction Length	`GDMA_InitTypeDef::GDMA_SourceMsize`	`GDMA_Msize_1`
Destination Burst Transaction Length	`GDMA_InitTypeDef::GDMA_DestinationMsize`	`GDMA_Msize_1`
Source Address	`GDMA_InitTypeDef::GDMA_SourceAddr`	`GDMA_SendBuffer`
Destination Address	`GDMA_InitTypeDef::GDMA_DestinationAddr`	`GDMA_RecvBuffer`
Multi-block Enable	`GDMA_InitTypeDef::GDMA_Multi_Block_En`	1
Multi-block Mode	`GDMA_InitTypeDef::GDMA_Multi_Block_Mode`	`LLI_TRANSFER`
Multi-block Struct	`GDMA_InitTypeDef::GDMA_Multi_Block_Struct`	`GDMA_LLIStruct`

Configure the information of the LLI structure.

Configure GDMA_LLIDef::SAR as the source address for each block transfer, and configure GDMA_LLIDef::DAR as the destination address for each block transfer.
Configure GDMA_LLIDef::LLP as a pointer to the LLI structure corresponding to the next block, to link the next transfer unit in multi-block transfers.
Configure GDMA_LLIDef::CTL_LOW with the basic information of the GDMA transfer; refer to the sample for specific configuration.
Configure GDMA_LLIDef::CTL_HIGH with the amount of data transferred for each block, with its value being GDMA_InitTypeDef::GDMA_BufferSize.

for (int i = 0; i < GDMA_MULTIBLOCK_SIZE; i++)
{
    if (i == (GDMA_MULTIBLOCK_SIZE - 1))
    {
        //GDMA_LLIStruct[i].LLP=0;
        GDMA_LLIStruct[i].SAR = (uint32_t)GDMA_SendBuffer[i];
        GDMA_LLIStruct[i].DAR = (uint32_t)GDMA_RecvBuffer[i];
        GDMA_LLIStruct[i].LLP = 0;
        /* configure low 32 bit of CTL register */
        GDMA_LLIStruct[i].CTL_LOW = BIT(0)
                                    | (GDMA_InitStruct.GDMA_DestinationDataSize << 1)
                                    | (GDMA_InitStruct.GDMA_SourceDataSize << 4)
                                    | (GDMA_InitStruct.GDMA_DestinationInc << 7)
                                    | (GDMA_InitStruct.GDMA_SourceInc << 9)
                                    | (GDMA_InitStruct.GDMA_DestinationMsize << 11)
                                    | (GDMA_InitStruct.GDMA_SourceMsize << 14)
                                    | (GDMA_InitStruct.GDMA_DIR << 20);
        /* configure high 32 bit of CTL register */
        GDMA_LLIStruct[i].CTL_HIGH = GDMA_InitStruct.GDMA_BufferSize;
    }
    else
    {
        GDMA_LLIStruct[i].SAR = (uint32_t)GDMA_SendBuffer[i];
        GDMA_LLIStruct[i].DAR = (uint32_t)GDMA_RecvBuffer[i];
        GDMA_LLIStruct[i].LLP = (uint32_t)&GDMA_LLIStruct[i + 1];
        /* configure low 32 bit of CTL register */
        GDMA_LLIStruct[i].CTL_LOW = BIT(0)
                                    | (GDMA_InitStruct.GDMA_DestinationDataSize << 1)
                                    | (GDMA_InitStruct.GDMA_SourceDataSize << 4)
                                    | (GDMA_InitStruct.GDMA_DestinationInc << 7)
                                    | (GDMA_InitStruct.GDMA_SourceInc << 9)
                                    | (GDMA_InitStruct.GDMA_DestinationMsize << 11)
                                    | (GDMA_InitStruct.GDMA_SourceMsize << 14)
                                    | (GDMA_InitStruct.GDMA_DIR << 20)
                                    | (GDMA_InitStruct.GDMA_Multi_Block_Mode & LLP_SELECTED_BIT);
        /* configure high 32 bit of CTL register */
        GDMA_LLIStruct[i].CTL_HIGH = GDMA_InitStruct.GDMA_BufferSize;
    }
}

Call GDMA_Init to initialize the GDMA peripheral.
Configure the GDMA block transfer completion interrupt: GDMA_INT_Block and NVIC. For NVIC-related configuration, refer to Interrupt Configuration.

Call GDMA_Cmd to enable GDMA channel for transmission.

Functional Implementation

After enabling GDMA, GDMA begins transferring data from GDMA_SendBuffer to GDMA_RecvBuffer. A block Transfer Complete interrupt GDMA_INT_Block will be triggered whenever a block transfer is completed. Within the interrupt handler, record the number of blocks that have been transferred. When the number of transmitted blocks equals the set value, compare whether the sent data is equal to the received data.

GDMA_ClearAllTypeINT(MULTI_BLOCK_DMA_CHANNEL_NUM);
block_cnt++;

if (block_cnt == GDMA_MULTIBLOCK_SIZE)
{
    /* Compare whether the destination data which transported by GDMA is equal to the source data*/
    for (uint32_t i = 0; i < GDMA_MULTIBLOCK_SIZE; i++)
    {
        for (uint32_t j = 0; j < GDMA_TRANSFER_SIZE; j++)
        {
            if (GDMA_SendBuffer[i][j] != GDMA_RecvBuffer[i][j])
            {
                IO_PRINT_ERROR4("multi_block_dma_handler: Data transmission error! index %d %d GDMA_SendBuffer = %d, GDMA_RecvBuffer = %d",
                        i, j, GDMA_SendBuffer[i][j], GDMA_RecvBuffer[i][j]);
            }
        }
    }

    IO_PRINT_INFO0("multi_block_dma_handler: Data transmission completion!");
}